##plugins.themes.academic_pro.article.main##

Abstract

Abstract

A high step-up Dc- Dc converter based on  the Modified SEPIC converter is present in this paper. This topology is the combination of a classical boost converter and a conventional SEPIC converter. The Modified SEPIC converter used for low input voltage and high output voltage applications. The theorectical analysis shows that it is suitable for the applications such as a renewable power sources with low DC output voltage The operational analysis and the design is done for the 100W power output of the modified converter. The solution is proved by MATLAB/SIMULINK.

##plugins.themes.academic_pro.article.details##

Author Biographies

Ms. Athira S. Babu, Mangalam College of Engg Kkottayam, Kerala

M.Tech Student, Dept. of EEE (Electrical & Electronics Engineering)

Ms. Jeepa K.J, Mangalam College of Engg Kkottayam, Kerala

Assisant Professor, Dept of EEE
How to Cite
Babu, M. A. S., & K.J, M. J. (2014). High Step-up Modified SEPIC Converter for Renewable Applications. International Journal of Emerging Trends in Science and Technology, 1(06). Retrieved from https://igmpublication.org/ijetst.in/index.php/ijetst/article/view/270

References

[1] C.W.Li, X,He, “Review of Non-isolated High STEP-Up DC/DC Converter in Photovoltaic Grid –Connected Applications”, IEEE Transactions on Industrial Electronics, vol. 58, no.4, pp.1239- 1250, April 2011.
[2] C.S.B.Kjaer, J.K.Pedersen and F.Blaabjerg, “A Review of Single-Phase Grid-Connected Inverters for Photovoltaic Modules”, IEEE Transactions on Industry Applications, vol. 41, no.5, pp.1292-1306, September 2005.
[3] D.Meneses, F.Blaadjerg, O.Garcia and J.A.Cobos“Review and Comparison of Step-Up transformerless Topologies for Photovoltaic AC-Module Applications”, IEEE Transactions on Industrial Electronics, vol.28, no.6, pp.2649-2663, june2013.
[4] M.Prudente,L.L.Pfitscher,G.Emmenndoerfer,E.F.Romaneli and R.Gules,“Voltage Multiplier Cells Applied to Non-Isolated DC-DC Converter”, IEEE Transactions on Industrial Electronics, vol.23,no 2, pp.871-887, March 2008.
[5] B.Axelrod, Y.Berkovich and A. Ioinovici, “Switched- Capacitor/Switched-Inductor Structures for Getting Transformerless Hybrid DC-DC PWM Converter ’’, IEEE Transactions on Circuits and System – I:Regular Papers, vol.55, no.2, pp.687-696, March 2008.
[6] R.J.Wai, C.Y.Lin, R.Y.Duan and Y.R.Chang, “High-Effiency DC-DC Converter With High Voltage Gain and Reduced Switch Stress”, IEEE Transactions on Industrial Electronics, vol.54, no.1, pp.354-364, February 2007.
[7] R.J.Wai and C.Y.Lin, R.Y.Duan, “High Step-Up Converter With Coupled-Inductor”, IEEE Transactions on Power Electronics, vol.20, no.5, pp.1025-1035, Septemper 2005.
[8] W.li,Y.Zhao, Y.Deng and X.He, “ Interleaved Converter With Voltage Multiplier Cell for High Step Up and High Effiency Conversion ’’, IEEE Transactions on Power Electronics, vol.20, no.9, pp.2397-2408, Septemper 2010.
[9] E.H.Ismail, M.A.Al-Saffer, A.J.Sabzali, and A.A.Fardoun, “A Family of Single-Switch PWM ConertersWith High Step-Up Conversion Ratio”, ,IEEE Transactions on Circuits and Systems-I:Regular Paper , vol.55, no.4, pp.1159-1171, May 2008.