Google Scholar

##plugins.themes.academic_pro.article.sidebar##

Published
Jul 1, 2015
Download
PDF
Statistic
Read Counter : 34 Download : 53

Downloads

Download data is not yet available.

##plugins.themes.academic_pro.article.main##

Abstract

There are more advanced quality and productivity requirements on rubber products. Transfer moulding remains the most popular method for producing the associated rubber parts. The main phases in a transfer moulding process involve filling, cooling and ejection. The properly determined gate location leads to better resin flow and shorter delay time, for that multi gating system is induced to bring down the defects in the component. The design of ejection system is one of the major considerations and adopting the air blow ejection by manual pneumatic switch (MPS) to achieve proper ejection of the component from the transfer mould. The material for rubber bumper spring is NR/BR (Natural/Polybutadiene) Rubber blend. Designing of mould is carried out by using computer aided designing software solid works 13.

Keywords: Transfer mould, Gating location, Ejection system, NR/BR (Natural/Polybutadiene) Rubber blend

##plugins.themes.academic_pro.article.details##

Author Biographies

Akash N, Govt. Tool Room & Training centre, Mysore, Karnataka

Student, 

Hemanth R, Govt. Tool Room & Training centre, Mysore, Karnataka

Lectures
How to Cite
N, A., & R, H. (2015). Design of Ejection System in Transfer Mould Tool and Justifying Material Selection of Rubber Bumper Spring Component. International Journal of Emerging Trends in Science and Technology, 2(07). Retrieved from http://igmpublication.org/ijetst.in/index.php/ijetst/article/view/774

References

1. Krell. Production of rubber moulding by injection transfer moulding, volume 195, page 1-19.
2. D Zaimova, E Bayraktar, D Katundi, Effect of processing condition on the physical, mechanical and viscoelastic properties, volume 50 issue 2, page 81-91, February 2012.
3. L. M. Robeson, Polymer Engineering and Science, 24 (1984) 587.
4. R.J.Crawford, Plastics and Rubber Engineering Design and Applications (Mechanical-Engineering Publications Ltd, London, 1985) p. 69.
5. M. Dos Santos, PAZ. Suarez and J. C. Rubim, Polym Degrad Stab 90 (2005) 34.
6. R. L. Warley and J. Halladay, Polym Test 24 (2005) 678.
7. G. M. Bristow and C. Metherell, Rubber Ind 7 (1973) 252.
8. A. K. Mallik and R. D. Shah, Indian Rubber Manufactures’ Research Association, Thana (1983) 31-43.
9. Saeed Taghvaei Ganjalia, FereshtehMotieea, A Study of Aging Properties of Uncured NR/BR Blends: Using TG-DTG Technique, Vol. 2, No. 4, 2011.
10. N. Karak and B.R. Gupta, Effects of Different Ingredients and Cure Parameters on Physical Properties of a Tyre Tread Compound, vol-2 ,1-2/2000.
11. Rani Joseph, George Joseph, Thomas, Studies on the Cure Characteristics and Vulcanizate Properties of 50/50 NR/BR Blend, Vol. 12,1987, pp. 53-64
12. FereshtehMotiee, SaeedTaghvaei-Ganjali-Investigation of correlation between rheological properties of rubber compounds based on NR/BR rubber with their thermal behaviors, 22 February 2013, doi: 10.1186/2228-5547-4-16.
13. R.G.W. Pye, Injection mould design text book, ISBN 81-7671-0105