##plugins.themes.academic_pro.article.main##
Abstract
Glass Fibre Reinforced Plastic are blended mixtures of two or more constituents whose properties differ substantially. Fibre reinforced polyester (FRP), commonly used to construct aircraft bodies or ships, is widely used in making a wide range of products like rocket launchers, VHS trains, automobiles, windmill blades and sports equipment. The need in industry is to be able to drill through these layers in one operation without need for any rework.
##plugins.themes.academic_pro.article.details##
How to Cite
Patil, H. M., & Patil, H. G. (2014). Experimental Investigation of Drill Tool on GFRP Composites. International Journal of Emerging Trends in Science and Technology, 1(10). Retrieved from http://igmpublication.org/ijetst.in/index.php/ijetst/article/view/437
References
1) Lynn Kletta, Barbara Framea and Vlastimil Kuncb, “Damage at Holes in Bolted Composite/Steel Joints For Heavy Vehicle Chassis Componentsâ€, Metals and Ceramic Division, 2005, pp. 1-11.
2) L. M. P. Durão, A. G. Magalhães ,â€Delamination analysis after carbon/epoxy plate drillingâ€, Institute Superior Engineering Geographic’s, Portugal, 2006, pp. 1-7.
3) Howard M. Matt, “A thesis on Structural Diagnostics of CFRP Compositeâ€, University of California San Diego, 2007, pp. 1-242
4) J. Mathew, N. Ramakrishna, N.K. Naik, “Trepanning on unidirectional composites: delamination studiesâ€, A Department of Mechanical Engineering, Regional Engineering College, Calicut, Kerala, 1998, pp. 1-9.
5) Athulan Vijayaraghavan, “Automated Drill Design Softwareâ€, 2006, pp. 1-13.
6) Victor Hugo C. de Albuquerque, Joao, Manuel R. S. Tavares, LuÃs M. P. Durao, “Evaluation of Delamination Damages on Composite Plates using Techniques of Image Processing and Analysis and a Backpropagation Artificial Neural Networkâ€, EngOpt 2008 - International Conference on Engineering Optimization, Brazil, 2008, pp. 1-8
7) S Sundaram, “Advantages of FRP in Bus Body Constructionâ€, Indian Journal of Transport Management, CIRT Publications, Pune, 2007, pp, 1-4.
8) S.C. Sharma, M. Krishna, and H.N. Narasimha Murthy, “Delamination during Drilling in Polyurethane Foam Composite Sandwich Structuresâ€, ASM International, 2006, pp.1
9) Sang-Woo Choi and Joon-Hyun Lee, “Nondestructive Evaluation of Internal Defects for Composite Materials by using Shearographyâ€, Key Engineering Materials Vols. 270-273, 2004, pp.-1-6.
10) T. D. Doiron, “Computer vision based station for tool setting and tool form measurementâ€, Precision Engineering, 1989, pp. 1-8
2) L. M. P. Durão, A. G. Magalhães ,â€Delamination analysis after carbon/epoxy plate drillingâ€, Institute Superior Engineering Geographic’s, Portugal, 2006, pp. 1-7.
3) Howard M. Matt, “A thesis on Structural Diagnostics of CFRP Compositeâ€, University of California San Diego, 2007, pp. 1-242
4) J. Mathew, N. Ramakrishna, N.K. Naik, “Trepanning on unidirectional composites: delamination studiesâ€, A Department of Mechanical Engineering, Regional Engineering College, Calicut, Kerala, 1998, pp. 1-9.
5) Athulan Vijayaraghavan, “Automated Drill Design Softwareâ€, 2006, pp. 1-13.
6) Victor Hugo C. de Albuquerque, Joao, Manuel R. S. Tavares, LuÃs M. P. Durao, “Evaluation of Delamination Damages on Composite Plates using Techniques of Image Processing and Analysis and a Backpropagation Artificial Neural Networkâ€, EngOpt 2008 - International Conference on Engineering Optimization, Brazil, 2008, pp. 1-8
7) S Sundaram, “Advantages of FRP in Bus Body Constructionâ€, Indian Journal of Transport Management, CIRT Publications, Pune, 2007, pp, 1-4.
8) S.C. Sharma, M. Krishna, and H.N. Narasimha Murthy, “Delamination during Drilling in Polyurethane Foam Composite Sandwich Structuresâ€, ASM International, 2006, pp.1
9) Sang-Woo Choi and Joon-Hyun Lee, “Nondestructive Evaluation of Internal Defects for Composite Materials by using Shearographyâ€, Key Engineering Materials Vols. 270-273, 2004, pp.-1-6.
10) T. D. Doiron, “Computer vision based station for tool setting and tool form measurementâ€, Precision Engineering, 1989, pp. 1-8