Google Scholar

##plugins.themes.academic_pro.article.sidebar##

Published
Oct 14, 2014
Download
PDF
Statistic
Read Counter : 42 Download : 35

Downloads

Download data is not yet available.

##plugins.themes.academic_pro.article.main##

Abstract

Electrical power systems is a large interrelated network which requires a careful design to maintain the system with constant power flow operation without any limitations. Flexible to improve the system stability of a power system. Unified Power Flow Controller (UPFC) is a flexible device in the FACTS family , which has the ability to  together control all the transmission parameters of power systems i.e. voltage, impedance and phase angle which determines the power flow of a transmission line. This project shows a case study to control the power flow of a power system with UPFC. In this paper we see how the upfc raise the transmission capability and decrease the power blocking in the transmission line , this study shows the results that we get by implementing a transmission system in  MATLAB. The results of the network with and without UPFC are compared in terms of active and reactive power flow in the transmission line at the bus to analyze the performance of UPFC.

Keywords :  FACTS  , UPFC , AC transmission line , statcom , sssc

##plugins.themes.academic_pro.article.details##

How to Cite
Rajput, P., & Sharma, C. S. (2014). Control of Power Flow in Transmission Line Using UPFC. International Journal of Emerging Trends in Science and Technology, 1(08). Retrieved from http://igmpublication.org/ijetst.in/index.php/ijetst/article/view/365

References

1. Vibhor Gupta , “Study and effects of UPFC and its control system for power flow control and voltage injection in power a power system”, International journal of engineering science and technology vol.2(7),2010,2558-2566
2. Hingorani, N.g., “High power Electronics and Flexible AC Transmission System”, IEEE Power Eng. REV., july 1988.
3. M. Noroozian, L. Angquist, M. Ghandhari, G. Andersson, “Use of UPFC for optimal power flow”, IEEE Transactions on Power Delivery, vol. 12, No. 4, October 1997.
4. Phasor Model of UPFC control, MATLAB v 7.6, „help‟- UPFC power flow control.
5. Control Block of UPFC - M. Toufan, U.D. Annakkage, “Simulation of The Unified Power Flow Controller performance Using PSCAD/EMTDC,” Electrical Power System Research Vol. 46, 1998, pp 67-75.
6. A. J. F. Keri, X. Lombard, A. A. Edris, “Unified Power Flow Controller (UPFC): Modelling and Analysi s”, IEEE Trans. on Power Delivery, Vol. 14, No. 2, April 1999, pp. 648-654.
7. L. Xu and V.G. Agelidis, “Flying Capacitor Multilevel PWM Converter Based UPFC‟, IEE Proc. Of Electronic Power Application, Vol. 149, No. 4, July 2003. Page(s) 304-310.
8. Narain G. Hingorani, Laszlo Gyugyi, “Understanding FACTS: Concepts and Technology of Flexible AC Transmission Systems,”IEEE Press Marketing, 1999, pp. 297-352, pp. 407-42
9. C. D. Schauder, D.M. Hamai, A. Edris, “Operation of the Unified Power Controller (UPFC) under practical constraints”, IEEE
10. I. Papic, P. Zunko, D. Povh, “Basic control of Unified Power Flow Controller” IEEE Trans. on Power Systems, Vol. 12, No.