Google Scholar

##plugins.themes.academic_pro.article.sidebar##

Published
Oct 2, 2014
Download
PDF
Statistic
Read Counter : 60 Download : 39

Downloads

Download data is not yet available.

##plugins.themes.academic_pro.article.main##

Abstract

Now a day’s construction of Interlocking concrete block pavements( ICBPs) generally called paver block  is going to increase rapidly with very high rate due to having easy laying, consuming less time, easy in installation and mainly due to found in a lot of variety and shapes which gives better surface finishing and attractive look. Demand of ICBPs increasing day by day for different categories like Non-traffic, Light-traffic, Medium-traffic, Heavy-traffic and Very heavy-traffic and applications likes Building premises, monument premises, landscapes, public garden, parks, domestic drives, Pedestrian plazas, shopping complexes ramps, car parks, office driveways, housing colonies, office complexes, rural roads with low volume traffic, City streets, small and medium market roads, low volume roads etc. In this experimental study we considering flexural strength for M-35 grade of paver block with partial replacement of cement with brick kiln dust (B.K.D.) at six different percentages like 5 %, 10  %,  15  %,  20  %,  25  %  and  30  % and comparison with conventional  mix that is 0 % of replacement of cement also adding 2 % waterproofing superplasticizer by weight of cement added at 7, 14 and 28 days.

Index Terms—Brick Kiln Dust (B.K.D.), Flexural Strength, OPC 43 grade cement, Superplasticizer.

##plugins.themes.academic_pro.article.details##

Author Biographies

Sharda Sharma, M.M.M.U.T. Gorakhpur

P.G. scholar, Department of Civil Engineering

Shiv Kumar Yadav, M.M.M.U.T. Gorakhpur

P.G. scholar, Department of Civil Engineering
How to Cite
Sharma, S., & Yadav, S. K. (2014). Flexural Strength of ICBPs utilizing Waste Brick Kiln Dust as a Partial Replacement of Cement adding Waterproofing Superplasticizer as a Admixture. International Journal of Emerging Trends in Science and Technology, 1(08). Retrieved from http://igmpublication.org/ijetst.in/index.php/ijetst/article/view/358

References

1. Benítez- et.-al “Implementation of the flexural strength test for concrete pavers” 9th. International Conference on Concrete Block Paving. Buenos Aires, Argentina, 2009/10/18-21.
2. Raman,S. N- et.-al “Influence of quarry dust & fly ash on the concrete compressive strength development”. Proc. AEESEAP Int. Conf. 2005.
3. Hameed-et.-al. “Properties of green concrete containing quarry rock dust and Marble sludge powder as fine aggregates”, ARPN journal of Engineering and applied Science, Vol. 4(4), pp 8389.
4. Barber, S.D., and Knapton, J. (1976) "An experimental investigation of the behaviour of a concrete block pavement". Cement Concrete Association, U.K.
5. Clark A.J. (1987), "Block paving research and development". Concrete, July, 24-25.
6. ASTM C-936. "Standard specification for solid concrete interlocking paving units".
7. ICPI "Design guidelines for Interlocking concrete block pavement". (Part 1 to Part 10).
8. Lakshmi Singh, A.and Md. S. Asgher. 2005. “Impact of brick kilns on land use/land covers changes around Aligarh city, India.” Habitat International 29 (2005) 591–602.
9. Brick Kilns Performance Assessment & a Roadmap for Cleaner Brick Production in India, Greentech Knowledge Solutions Pvt Ltd, February 2012.
10. Damle Anand, 2007, Present Status of the Brick Industry in India – Raw Materials, Process Technology and Market. Tile and Brick International.
11. Environmental cost of using top-soil for brick making – A case study from India. ‘Livelihood and social security issues of brick kiln workers’ held at Mahtama Gandhi Labour Institute, Ahmedabad on 25th August 2009.
12. Development Alternatives, 2005: Environmental and Social Report for VSBK - A Guidance document for Entrepreneurs and Project Auditors.
13. IS 15658:2006, Precast concrete blocks for paving block, Bureau of Indian Standard, New Delhi.
14. IS: 8112-1989, 43 grade ordinary Portland cement, Bureau of Indian Standard, and New Delhi.
15. IS: 383-1970 Specification for coarse and fine aggregate from natural sources for concrete (Second Revision), Bureau of Indian Standard, New Delhi.
16. IS:516-1959 “Methods of tests of concrete ”Bureau of Indian Standards, New Delhi
17. IS 456-2000, Plain and reinforced concrete – code for practice (Fourth Revision), Bureau of Indian Standard, New Delhi.
18. Concrete Block Paving Book 1: Introduction Published by the Concrete Manufacturers Association.
19. Concrete Block Paving Book 3: Specification and Installation Published by the Concrete Manufacturers Association.