##plugins.themes.academic_pro.article.main##
Abstract
The MATLAB model of speed control of induction motor by using indirect vector control through IP speed controller is represent in this model ,cage type 50 HP induction motor is use for representation of this model. The field orientation theory is take place for detailed studies of this model in simulation. Motor speed control by using PI control in Field orientated control (FOC) drives. .In induction motor scalar control have some limitation which is overcome by the field orientation control . The indirect vector controlled induction motor drive involve dissociate of the stator current in to torque and flux producing components.
Keywords: Induction motor, Indirect vector control, Proportional integral controller##plugins.themes.academic_pro.article.details##
How to Cite
Verma, G., Sharma, C. S., & Phulambikar, S. (2014). Speed Control of an Induction Motor by Using Indirect Vector Control through PI Controller. International Journal of Emerging Trends in Science and Technology, 1(07). Retrieved from http://igmpublication.org/ijetst.in/index.php/ijetst/article/view/324
References
1. Ashutosh Mishra and Prashant Choudhary" Speed Control Of An Induction Motor By Using Indirect Vector Control Method "www.ijetae.com (ISSN 2250- 2459,ISO9001:2008 Certified Journal, Volume 2, Issue 12, December 2012)
2. T. Thakur et al., " Indirect Vector Controlled Induction Motor Propulsion Drive for Marine Applications ", American International Journal of Research in Science, Technology, Engineering & Mathematics, 2(2), March-May, 2013
3. Amar Nath Sinha and Shashi Minz " Analysis of Vector control of Induction Motor using MATLAB and its application in traction system" VSRD International Journal of Electrical, Electronics & Communication Engineering, Vol. III Issue X October 2013
4. R. Krishna and A.S. Bharadwaj, “A Review of Parameter Sensitivity and Adaptation in Indirect Vector Controlled Induction Motor Drive Systemsâ€, IEFE Transactions On Power Electronics, Vol. 6, No 1, pp. 695-703, Oct 1991.
5. Singh, B. N. Singh, and B. P. Singh, “Performance Analysis of a Low Cost Vector Controlled Induction Motor Drive: A Philosophy for Sensor Reductionâ€, IEEE IAS Annu. Meet. Conf. Rec., pp. 789-794, 1997.
6. Miloudi and A. Draou “Variable Gain PI Controller Design For Speed Control and Rotor Resistance Estimation of an Indirect Vector Controlled Induction Machine Drive †Conference Record of the IECON ’02 Sevilla, Spain, Vol. 1, pp. 323-328, Nov 2002
7. F. Biaschke, “The principle of field oriention as applied to newtrans vector closed loop control system for rotating field machine,†Siemens Rev, vol. 34 may 1972
2. T. Thakur et al., " Indirect Vector Controlled Induction Motor Propulsion Drive for Marine Applications ", American International Journal of Research in Science, Technology, Engineering & Mathematics, 2(2), March-May, 2013
3. Amar Nath Sinha and Shashi Minz " Analysis of Vector control of Induction Motor using MATLAB and its application in traction system" VSRD International Journal of Electrical, Electronics & Communication Engineering, Vol. III Issue X October 2013
4. R. Krishna and A.S. Bharadwaj, “A Review of Parameter Sensitivity and Adaptation in Indirect Vector Controlled Induction Motor Drive Systemsâ€, IEFE Transactions On Power Electronics, Vol. 6, No 1, pp. 695-703, Oct 1991.
5. Singh, B. N. Singh, and B. P. Singh, “Performance Analysis of a Low Cost Vector Controlled Induction Motor Drive: A Philosophy for Sensor Reductionâ€, IEEE IAS Annu. Meet. Conf. Rec., pp. 789-794, 1997.
6. Miloudi and A. Draou “Variable Gain PI Controller Design For Speed Control and Rotor Resistance Estimation of an Indirect Vector Controlled Induction Machine Drive †Conference Record of the IECON ’02 Sevilla, Spain, Vol. 1, pp. 323-328, Nov 2002
7. F. Biaschke, “The principle of field oriention as applied to newtrans vector closed loop control system for rotating field machine,†Siemens Rev, vol. 34 may 1972