##plugins.themes.academic_pro.article.main##
Abstract
This paper presents a new bidirectional dc-dc converter for renewable energy sources with a main objective of building a reliable power source with the available unreliable energy sources i.e., renewable energy sources. Compared to the traditional full and half bridge bidirectional dc-dc converters for the similar applications, the new topology has the advantages of soft switching implementation without additional devices, high efficiency and simple control. These advantages make the new converter promising for medium and high power applications especially for auxiliary power supply in fuel vehicles and power generation where the high power density, low cost, light weight and high reliability power converters are required. The bi-directional dc-dc converter is simulated using ORCAD. The circuit is simulated in the Buck & Boost mode. The simulation results coincide with the results tested experimentally on bidirectional converters. The operating principle, theoretical analysis is provided in this project. The control circuit, power circuit & driver circuit are fabricated on general purpose PCB. The experimental results coincide with the simulation results.
##plugins.themes.academic_pro.article.details##
How to Cite
Sundar, D., Shanmugavadivu, K., & Padmavathi, G. (2014). Modular Bi-Directional Power Flow Converter for Multiple Renewable Energy Sources. International Journal of Emerging Trends in Science and Technology, 1(07). Retrieved from http://igmpublication.org/ijetst.in/index.php/ijetst/article/view/296
References
[1] L. Solero, F. Caricchi, F. Crescimbini, O. Honorati, and F. Mezzetti, “Performance of a 10 kW power electronic interface for combined wind/PV isolated generating systems,†in Proc. IEEE Power Electron. Spec. Conf., 1996, pp. 1027–1032.
[2] F. Caricchi, F. Crescimbini, A. Di Napoli, O. Honorati, and E. Santini, “Testing of a new DC-DC converter topology for integrated wind-photovoltaic generating systems,†in Proc. IEEE Eur. Conf. Power Electron. Appl., 1993, pp. 83–88.
[3] H. Matsuo, T. Shigemizu, F. Kurokawa, and N. Watanabe, “Characteristics of the multiple-input DC-DC converter,†in Proc. IEEE Power Electron. Spec. Conf., 1993, pp. 115–120.
[4] H. Matsuo, K. Kobayashi, Y. Sekine, M. Asano, and L. Wenzhong, “Novel solar cell power supply system using the multiple-input DC-DC converter,†in Proc. IEEE Int. Telecommun. Energy Conf., 1998, pp. 797–802.
[5] Y. M. Chen, Y. C. Liu, F. Y. Wu, and T. F. Wu, “Multi-input DC/DC converter based on multiwinding transformer for renewable energy application,†IEEE Trans. Ind. Appl., vol. 38, no. 4, pp. 1096–1104, Jul./ Aug. 2002.
[6] L. Solero, A. Lidozzi, and J. A. Pomilio, “Design of multiple-input power converter for hybrid vehicles,†IEEE Trans. Power Electron., vol. 20, no. 5, pp. 1007–1016, Sep. 2005.
[7] H. Tao, A. Kotsopoulos, J. L. Duarte, and M. A. M. Hendrix, “Multiinput bidirectional dc-dc converter combining DC-Link and magneticcoupling for fuel cell systems,†in Proc. IEEE IAS Annu. Meeting Conf., 2005, pp. 2021–2028.
[8] F. Z. Peng, H. Li, G.-J. Su, and J. Lawler, “A new ZVS bi-directional dc-dc converter for fuel cell and battery applications,†IEEE Trans. Power Electron., vol. 19, no. 1, pp. 54–65, Jan. 2004.
[2] F. Caricchi, F. Crescimbini, A. Di Napoli, O. Honorati, and E. Santini, “Testing of a new DC-DC converter topology for integrated wind-photovoltaic generating systems,†in Proc. IEEE Eur. Conf. Power Electron. Appl., 1993, pp. 83–88.
[3] H. Matsuo, T. Shigemizu, F. Kurokawa, and N. Watanabe, “Characteristics of the multiple-input DC-DC converter,†in Proc. IEEE Power Electron. Spec. Conf., 1993, pp. 115–120.
[4] H. Matsuo, K. Kobayashi, Y. Sekine, M. Asano, and L. Wenzhong, “Novel solar cell power supply system using the multiple-input DC-DC converter,†in Proc. IEEE Int. Telecommun. Energy Conf., 1998, pp. 797–802.
[5] Y. M. Chen, Y. C. Liu, F. Y. Wu, and T. F. Wu, “Multi-input DC/DC converter based on multiwinding transformer for renewable energy application,†IEEE Trans. Ind. Appl., vol. 38, no. 4, pp. 1096–1104, Jul./ Aug. 2002.
[6] L. Solero, A. Lidozzi, and J. A. Pomilio, “Design of multiple-input power converter for hybrid vehicles,†IEEE Trans. Power Electron., vol. 20, no. 5, pp. 1007–1016, Sep. 2005.
[7] H. Tao, A. Kotsopoulos, J. L. Duarte, and M. A. M. Hendrix, “Multiinput bidirectional dc-dc converter combining DC-Link and magneticcoupling for fuel cell systems,†in Proc. IEEE IAS Annu. Meeting Conf., 2005, pp. 2021–2028.
[8] F. Z. Peng, H. Li, G.-J. Su, and J. Lawler, “A new ZVS bi-directional dc-dc converter for fuel cell and battery applications,†IEEE Trans. Power Electron., vol. 19, no. 1, pp. 54–65, Jan. 2004.